Refined by
Hide irrelevant options
Produktgrupp
Show all filters
Hide all filters
CUT - Skarvhylsa för jordlina 1.5-25mm²
Connectors for solid copper conductors
Material: 99.9% pure copper
- Suitable for Class 1 conductor:
- Yes
- Suitable for Class 2 conductor:
- Yes
- Model:
- Standard version
- Number of branches:
- 0 N/A
- Insulation:
- None
- Colour insulation:
- N/A
- Sleeve form:
- Short
- Suitable for solid cores:
- Yes
- Suitable for stranded conductors:
- Yes
- Suitable for fine strand conductors:
- No
- Suitable for high temperatures (to 650 °C):
- No
- Suitable for insulated varnish:
- No
- Suitable for round conductors:
- Yes
- Suitable for flat conductors:
- No
- For pull protected connections:
- No
- Voltage level:
- Up to 35 kV
- Type of connection:
- Other
- Max Temp:
- 150 °C
- Surface protection:
- Bare
- Material:
- Copper
- Series:
- CUT
Skarv för Enkel – flertrådig kabel
Copper connectors that can be used when connecting solid wires to stranded wires.
Material: 99.9% pure copper
Surface:> 4μ Sn
- Suitable for Class 1 conductor:
- Yes
- Suitable for Class 2 conductor:
- Yes
- Model:
- Standard version
- Number of branches:
- 0 N/A
- Insulation:
- None
- Colour insulation:
- N/A
- Sleeve form:
- Short
- Suitable for solid cores:
- Yes
- Suitable for stranded conductors:
- Yes
- Suitable for fine strand conductors:
- Yes
- Suitable for high temperatures (to 650 °C):
- No
- Suitable for insulated varnish:
- No
- Suitable for round conductors:
- Yes
- Suitable for flat conductors:
- No
- For pull protected connections:
- No
- Voltage level:
- Up to 35 kV
- Type of connection:
- Other
- Max Temp:
- 150 °C
- Surface protection:
- Tinned
- Material:
- Copper
PTS-4
Självjusterande skalverktyg med raka skär för 0.2-6.0 mm².
Tillverkad i glasfiberförstärkt polyamid och aluminium.
Justerbar skallängd upp till 18 mm samt separat klippfunktion.
Längd: 170 mm
- Depth of notch adjustable:
- No
- Longitudinal section:
- No
- Round edge:
- Yes
- Spiral cut:
- No
- Strip length adjustable:
- No
- With wire cutter:
- Yes
- Grip design:
- Other
- ESD tested:
- No
- With impact protection:
- No
- Stripping tool type:
- Självjusterande
- Isolation protection 1000 V:
- No
- VDE tested:
- No
Kabelskalare MWS 125
Spring loaded mini stripping tool with adjusting screw.With grip-friendly PVC handle.Made of polished black CrV.
Length: 125 mm
- Depth of notch adjustable:
- Yes
- Longitudinal section:
- No
- Round edge:
- Yes
- Spiral cut:
- No
- Strip length adjustable:
- No
- With wire cutter:
- No
- Grip design:
- 1-component
- ESD tested:
- No
- With impact protection:
- No
- Insulated:
- Yes
- Stripping tool type:
- Fasta uttag
- Isolation protection 1000 V:
- No
- VDE tested:
- No
Stripping tool – NCS 0516
Stripping tool with rounded steel stripping blades and intelligent self-adjustment for 0.5-16 mm².
For fine-stranded & solid conductors with halogen-free, PVC or rubber insulation.
Adjustable for diverse insulation materials and thickness.
Automatic opening of jaws after stripping.
Length positioner for adjustable stripping length from 2.0-17.0 mm.
Cutting function for 6.0 mm² solid or 16 mm² fine-stranded conductor.
Ergonomic design for fatigue-free work.
- Depth of notch adjustable:
- Yes
- Longitudinal section:
- No
- Round edge:
- No
- Spiral cut:
- No
- Strip length adjustable:
- Yes
- With wire cutter:
- Yes
- Grip design:
- 2-components
- ESD tested:
- No
- Insulated:
- Yes
- Isolation protection 1000 V:
- No
- VDE tested:
- No
MEST-Serien, Kontramutter, Rostfritt stål
Material: Rostfritt stål 316L/1.4401
Drifttemperatur:-50º C till +250º C
- With grounding connection:
- No
- Material quality:
- Stainless steel 316 (V4A)
- Shape:
- Hexagonal
- Thread type:
- Metric, PG
- Glass-fibre reinforced:
- No
- Shock resistant:
- Yes
- Colour:
- Nickel
- Surface protection:
- Untreated
- Material:
- Metal
- Halogen free:
- Yes
Vattentät skarvhylsa
Vattentäta Skarvhylsor NW-Serien.
Med tätningar som gör att IP57 uppnås utan behov av uppvärmning/krympning.
Max spänning: 300V
Max ström: 15 A NW (1525 SK), 20A (NW 2527 SK)
Temp.område: -40°C - + 105°C
IP57
UL94V-2
- Suitable for Class 2 conductor:
- Yes
- Suitable for Class 5 conductor:
- Yes
- Model:
- Standard version
- Number of branches:
- 0 N/A
- Insulation:
- Other
- Colour insulation:
- Blue, Red
- Sleeve form:
- Short
- Suitable for solid cores:
- Yes
- Suitable for stranded conductors:
- Yes
- Suitable for fine strand conductors:
- Yes
- Suitable for high temperatures (to 650 °C):
- No
- Suitable for insulated varnish:
- No
- Suitable for round conductors:
- Yes
- Suitable for flat conductors:
- No
- For pull protected connections:
- No
- Voltage level:
- Other
- Type of connection:
- Other
- Surface protection:
- Tinned
- Material:
- Copper
- Voltage max:
- 600V
- Halogen free:
- Yes
- UL-File No.:
- E44245
NHK SS3
NHK SS3
Rostfri slidkniv med greppvänligt 3-skikts gummihandtag.
Slida i plast med hållare för knapp och bälte.
Längd: 220 mm
Bladlängd: 100 mm
Skalkniv med Hook, Inkl. läderslida
Electric knife / Cable knife. Available with blue or red handle, right or left sharpened hook. Plastic handle, stainless steel blade. Leather sheath with belt holder. The knives can be delivered with or without sheath, the sheaths can also be sold loose. Length: 150 mm Blade length: 35 mm
- With protective cover:
- Yes
- Shape of blade:
- Straight
- Cable knife:
- Yes
- Retractable knife:
- No
- With floating shoe:
- No
- With scraper:
- No
- Foldable:
- No
- Extendable:
- No
- With interlocking:
- No
- Self retracting:
- No
- Isolation protection 1000 V:
- No
- VDE tested:
- No
- Suitable for Class 1 conductor:
- Yes
- Suitable for Class 2 conductor:
- Yes
- For pull protected connections:
- No
- Voltage level:
- Other
- Cross section form:
- Round/sector-shaped
- Connection as copper bolt:
- Yes
- Suitable for Al/St-cables:
- No
- Suitable for Aldrey-cables:
- No
- Max Temp:
- 150 °C
- Surface protection:
- Untreated
- Material:
- Aluminium/copper
- Suitable for Class 1 conductor:
- Yes
- Suitable for Class 2 conductor:
- Yes
- For pull protected connections:
- No
- Voltage level:
- Other
- Cross section form:
- Round/sector-shaped
- Connection as copper bolt:
- No
- Suitable for Al/St-cables:
- No
- Suitable for Aldrey-cables:
- No
- Max Temp:
- 150 °C
- Surface protection:
- Untreated
- Material:
- Aluminium/copper
NYLFLEX, slitted PA6, black, automotive
Slitsad, halogenfri, svårantändlig, värmestabil och UV-beständig. En standardslang med god flexibilitet som ger ett mycket gott skydd för elektriska ledningar mot fukt, smuts och mekanisk åverkan. Materialet är dessutom motståndkraftigt mot oljor, fett, lösningsmedel och drivmedel av olika slag. För fordonsindustrin, maskin och apparatbyggen samt för verkstäder.
Material: PA 6
Temperaturområde: -40° C till +120° C
Färg: Svart RAL 8022
Övriga egenskaper: UV-beständig, flamavvisande
Tryckhållfasthet: 350 N / 50 mm, slag 6J
- Compressive strength:
- 350 N
- Fire resistance according to UL94:
- HB
- Oil resistant:
- Yes
- Lengthwise slotted:
- Yes
- Closable (two-part):
- No
- With draw wire:
- No
- High conducting inner coating:
- No
- Degree of protection (IP):
- IP66
- Colour:
- Black
- Material:
- Polyamide 6
- Halogen free:
- Yes
- Suitable in fire resistance areas:
- Yes
- Approved according to DIN EN 61386-23:
- No
- Approves according to Vd TÜV/GGVS:
- Yes
- Approved according to LUL/British Standard:
- No
- Approved according to Lloyd's Register TA:
- No
- Approved according to UTAC:
- No
- Approved according to DIN 5510:
- No
- Approved according to NF F 16-101:
- No
- VDE tested:
- Yes
- Approved according to CSA:
- No
NLFLEX, PA6, black, automotive, 10m
Halogen free, non-flammable, heat-stable and UV resistant. An ADR approved standard conduit with good flexibility that gives a very good protection for electrical wiring against moisture, dirt and mechanical damage. The material is also resistant to oils, grease, solvents and fuels of various kinds. For the automotive industry, machine and apparatus construction as well as workshops.
- Compressive strength:
- 300 N
- Fire resistance according to UL94:
- HB
- Oil resistant:
- Yes
- Lengthwise slotted:
- No
- Closable (two-part):
- No
- With draw wire:
- No
- High conducting inner coating:
- No
- Degree of protection (IP):
- IP66
- Colour:
- Black
- Material:
- Polyamide 6
- Halogen free:
- Yes
- Suitable in fire resistance areas:
- Yes
- Approved according to DIN EN 61386-23:
- No
- Approved according to UR:
- No
- Approves according to Vd TÜV/GGVS:
- Yes
- Approved according to LUL/British Standard:
- No
- Approved according to Lloyd's Register TA:
- No
- Approved according to UTAC:
- No
- Approved according to DIN 5510:
- No
- Approved according to NF F 16-101:
- No
- Approved according to CSA:
- No
Kapverktyg för DIN-skenor
Kapverktyg för DIN-skenor med lång hävarm för hög kraft.
Kapar skenan utan grader och skrot.
Längdstopp samt håltagningsstans 6.3x10.0mm ingår.
Längd: 1110 mm.
Vikt: 9.2 kg
Se nedan vilka skentyper verktyget kan kapa.
RKUB Multi conductor
Connection cable for car and boat applications. The cable comes on spool of 50 m or 100 m. See table below.
Packaging (OD x Hub x Width):
Spool B3: 160mm x 56mm x 50mm
Spool B4: 160mm x 56mm x 90mm
Spool B5: 200mm x 56mm x 88mm
Structure
Conductor: Blank stranded copper
Conductor insulation: PVC
Core identification: According to table below
Technical data:
Rating voltage: 60V
Temperature range: -25ºC to +70ºC (-13ºF to +158ºF)
- Number of cores:
- 2-4 .
- Material core insulation:
- Polyvinyl chloride (PVC)
- Specification core insulation:
- Other
- Core identification:
- Colour
- Protective conductor:
- No
- Material outer sheath:
- Polyvinyl chloride (PVC)
- Specification material outer sheath:
- Other
- Colour outer sheath:
- Other
- Flame retardant:
- According to IEC/EN 60332-1-2
- Permitted cable outer temperature after assembling without vibration:
- -30-70 °C
- Conductor material:
- Copper
- Twisted cores:
- No
- Max. conductor temperature:
- 70 °C
- Screen:
- No
- Armouring/reinforcement:
- None
- Insulation integrity:
- N/A
- Drain wire:
- No
- Nominal voltage:
- 60 V
- Halogen free:
- No
- Conductor category:
- Class 5 = flexible
- Single insulated/Double insulated:
- Single insulated
- Colour:
- Transparent, Red/black, Blue/Black, Brown/Brown, Brown/Red, Brown/Black, Grey/Grey, Red/Red, Red/Black/White/Blue, Black/Black, White/White
- Core colour:
- Several
- Conductor surface:
- Bare
- Packaging:
- Reel B3, Reel B4, Reel B5
- Min. permitted bending radius, stationary application/permanent installation:
- 15.2-44.8 mm
- Reaction-to-fire according to EN 13501-6: Class:
- N/A
- Reaction-to-fire according to EN 13501-6: Smoke production:
- N/A
- Reaction-to-fire according to EN 13501-6: Flaming droplets/particles:
- N/A
- Reaction-to-fire according to EN 13501-6: Acidity:
- N/A
- Low smoke (according to EN 61034-2):
- Yes, No
- Low temperature resistant (according to EN 60811-504+505+506):
- No
- Oil resistant according to EN IEC 60811-404:
- No
ADR-kabel
Low-voltage cable in PVC / PVC / PUR for transportation of dangerous material in accordance with DIN 72 570 Teil 10, GGVS / ADR Anhang B2. ADR cable is designed for use in commercial vehicle manufacturing. It is used for electrical installations on various types of trailers and truck trailers for transport of dangerous material as GGVS / ADR. The cables are UV and cold resistant, and thanks to the sheath material of PUR, in large extent it is even oil-, weather- and chemical resistant. The outer sheath of PUR makes the cable rubbing resistant, micro resistant and hydrolysis resistant. The cables are developed according to international standard, ISO 4141.
Packaging: Coil/Drum
Structure
Conductor: Stranded blank copper wire.
Conductor insulation: PVC-based conductor insulation. The conductors twisted in layers.
Inner Sheath: Special mixture on PVC base.
Outer Sheath: Special polyurethan (PUR), black.
Color code: According to ISO 4141-3, see pdf under documents.
Technical data:
Rating peak voltage (not for strong Power): 60V
Test voltage: 5 kV, minimum 5 minutes
Insulation resistance: 10 Mohm x km
Minimum bending radius: 12 x cable diameter
Temperature range: -40ºC to +85ºC
Conductor Structure: Stranded EN 60288.5
Approvals: ISO 4141 and DIN / ISO 6722ADR / GGVS
- Number of cores:
- 2-15 .
- Material core insulation:
- Polyvinyl chloride (PVC)
- Specification core insulation:
- Other
- Core identification:
- Colour
- Protective conductor:
- No
- Material outer sheath:
- Polyurethane (PUR)
- Specification material outer sheath:
- Other
- Colour outer sheath:
- Other
- Flame retardant:
- No
- Permitted cable outer temperature after assembling without vibration:
- -30-85 °C
- Conductor material:
- Copper
- Twisted cores:
- No
- Max. conductor temperature:
- 85 °C
- Screen:
- No
- Armouring/reinforcement:
- None
- Insulation integrity:
- N/A
- Drain wire:
- No
- Nominal voltage:
- 60 V
- Halogen free:
- No
- Conductor category:
- Class 5 = flexible
- Single insulated/Double insulated:
- Double insulated
- Colour:
- Black
- Core colour:
- Several
- Conductor surface:
- Bare
- Packaging:
- Ring
- Min. permitted bending radius, stationary application/permanent installation:
- 54.08-170.56 mm
- Reaction-to-fire according to EN 13501-6: Class:
- N/A
- Reaction-to-fire according to EN 13501-6: Smoke production:
- N/A
- Reaction-to-fire according to EN 13501-6: Flaming droplets/particles:
- N/A
- Reaction-to-fire according to EN 13501-6: Acidity:
- N/A
- Low smoke (according to EN 61034-2):
- No
- Low temperature resistant (according to EN 60811-504+505+506):
- No
- Oil resistant according to EN IEC 60811-404:
- No
Copper lugs & metal sheet terminals, HDD 06120, K 1095
Simpler hexagon crimping tool.
HDD 06120: 6-120 mm² copper lugs type KRT and metal sheet terminals (DIN)
K 1095: 6-95 mm² copper lugs type KRF
Length: 660 mm
- Number of crimps:
- 1
- With locking device (for mechanical tools):
- No
- Inserts exchangeable:
- No
- Number of included inserts:
- 1 .
- With automatic return:
- No
- Cycle time:
- 2 s
- Suitable for:
- Cable lugs and connectors
- Construction/operation:
- Mechanical
- For component:
- Non-insulated Cu tube and sheet terminals
- Compression shape:
- Hexagon
N 2258
N 2258 is a crimping tool for 6.0-16.0 mm² CUT, KR/KS 4.0-6.0 mm² and KRF/KSF 10.0-16.0 mm².
There are 3 die nests:
1: Cut 6.0-10.0 mm² & KR/KS 4.0-6.0 mm²
2: Cut 16.0 mm² & KRF/KSF 10.0 mm²
3: KRF/KSF 16.0 mm²
Length: 260 mm
- Number of crimps:
- 1
- With locking device (for mechanical tools):
- Yes
- Inserts exchangeable:
- No
- Number of included inserts:
- 1 .
- With automatic return:
- Yes
- Cycle time:
- 2 s
- Suitable for:
- Cable lugs and connectors
- Construction/operation:
- Mechanical
- For component:
- Non-insulated Cu tube and sheet terminals
- Compression shape:
- Hexagon, Arbour clamping
- Number of crimps:
- 1
- With locking device (for mechanical tools):
- No
- Inserts exchangeable:
- No
- Number of included inserts:
- 1 .
- With automatic return:
- No
- Cycle time:
- 2 s
- Suitable for:
- Cable lugs and connectors
- Construction/operation:
- Mechanical
- For component:
- Non-insulated Cu tube and sheet terminals
- Compression shape:
- Hexagon
HDD 0650
HDD 0650 is a simpler hexagon crimping tool for 6-50 mm² copper lugs type KRT and metal sheet terminals (DIN).
Length: 390 mm
- Number of crimps:
- 1
- With locking device (for mechanical tools):
- No
- Inserts exchangeable:
- No
- Number of included inserts:
- 1 .
- With automatic return:
- No
- Cycle time:
- 2 s
- Suitable for:
- Cable lugs and connectors
- Construction/operation:
- Mechanical
- For component:
- Non-insulated Cu tube and sheet terminals
- Compression shape:
- Hexagon
Crimping tools - HD BGD3
Crimp Tonol for Burndy.
Crimp slots: BG & D3
Press force: 4.5 ton
Length: 645 mm
Weight: 3.2 kg
Crimp dies: KW (in D3 slot)
Available dies: BG, O, C, K840, 161, 162, 163, 164, 165, 166, 171, 237, 243, 247, 249, 702
Delivered in plastic case.
- With locking device (for mechanical tools):
- No
- Inserts exchangeable:
- Yes
- Number of included inserts:
- 1 .
- With automatic return:
- No
- Cycle time:
- 2 s
- Suitable for:
- Cable lugs and connectors
- Construction/operation:
- Mechanical
- For component:
- Non-insulated Cu tube and sheet terminals
- Compression shape:
- Round compression
HD 120
HD 120 is a simpler thorn-crimping tool for 10-120 mm² copper lugs type KRT and metal sheet terminals (DIN).
The area is set continuously against the scale which allows over-crimp, in applications needed.
Length: 650 mm
- Number of crimps:
- 1
- With locking device (for mechanical tools):
- No
- Inserts exchangeable:
- No
- Number of included inserts:
- 1 .
- With automatic return:
- No
- Cycle time:
- 2 s
- Suitable for:
- Cable lugs and connectors
- Construction/operation:
- Mechanical
- For component:
- Non-insulated Cu tube and sheet terminals
- Compression shape:
- Arbour clamping
Pressverktyg för Modularkontakter – ASR 486
Pressverktyg för 4, 6 och 8-poliga modularkontakter. Utrustad med en skal- och klippfunktion.
En ratchettång med inbyggd returspärr som garanterar att kontaktpressningen fullföljs.
- Number of crimps:
- 1
- With locking device (for mechanical tools):
- Yes
- Inserts exchangeable:
- No
- Number of included inserts:
- 1 .
- With automatic return:
- Yes
- Cycle time:
- 2 s
- Suitable for:
- Cable lugs and connectors
- Construction/operation:
- Mechanical
- For component:
- Modularplugg
- Compression shape:
- Notching