Refined by
Hide irrelevant options
Produktgrupp
Show all filters
Hide all filters
- Reel/roll packaging:
- Yes
- Max. current (Imax):
- 16-27 A
- Flange shape:
- Ring shape
- According to DIN:
- No
- Insulation:
- None
- Colour insulation:
- Other
- Sleeve form:
- Short
- Suitable for solid cores:
- Yes
- Suitable for stranded conductors:
- Yes
- Suitable for fine strand conductors:
- Yes
- Suitable for high temperatures (to 650 °C):
- No
- Suitable for insulated varnish:
- No
- Suitable for round conductors:
- Yes
- Suitable for flat conductors:
- No
- Surface protection:
- Tinned
- Material:
- Copper, Brass
- Neck type:
- Open barrel crimp
- UL-File No.:
- E42024
NELCON, 2:1, without adhesive, 1.0m lenght
Nelcon is a strong, flexible, heat shrink tubing for universally use. Nelcon has good resistance to fluids and solvents, and good dielectric strength.
Shrink ratio at 2:1 and 3:1, and the tubes unique combination of chemical, electrical and physical properties it is suitable for a variety of uses.
Applications: Electrical insulation, strain relief, bundling, mechanical protection, color coding of wires, cables, tubes and electronic components.
Material: Polyolefin
Temperature range: -40º C - +135º C
Lowest shrink temperature: +120º C
Wall thickness: Thin wall
Shrink ratio: 2:1
Self-extinguishing: Yes
- Model:
- Thin-walled
- Transparent:
- Yes, No
- Type:
- Heat-shrink
- Shrink rate:
- 2:1
- With inner glue:
- No
- Printable:
- No
- Colour:
- Black, Green, Yellow, Green/yellow, Red, White, Blue, Colourless
- Material:
- Polyolefin (PO-X)
- Halogen free:
- No
Flatstiftshylsor - Bandvara
Material:
B 2507 FL SILVER: Silverplätterad mässing
BB-serien: Förtent mässing
STO-xxT-110N: Förtent mässing
STO-x.x-xxxN: Oförtent mässing
Temperaturområde: -10 - 110°C
Passande pressverktyg för STO-serien från JST är YC-041 (STO-01T-110N) och YC-062 (STO-41T-110N). Se länk nedan.
- Model:
- Bushing
- Max. current (Imax):
- 8-24 A
- Insulation:
- Not isolated
- Colour insulation:
- Other
- With cam clamp:
- No
- With tap spreader:
- No
- Material insulation:
- Other
- Material:
- Brass
- Neck type:
- Open barrel crimp
- UL-File No.:
- E70188
Electro-hydaulic HEX-crimp equipment for 10-240 mm²
The NTHC HX240 is a hexagonal crimp machine that operates without the need for die changes on copper and aluminum cable lugs. The machine utilizes the same dies for cable lugs and splice sleeves, covering a range from 10-240 mm² Cu to 16-150 mm² Al.
The crimping is performed by six sides smoothly sliding against each other from opposite directions, eliminating the risk of protrusions after the crimp. The stepless height adjustment allows for versatile use with various copper and aluminum cable lugs, regardless of the manufacturer.
The NTHC HX240 comes with pre-programmed series for different cable lugs, providing the operator with the ability to save additional settings as needed. Its die-less design saves the user from costly investments and the risk of misplacing die sets.
Technical Specifications:
Press Force: 200 kN
Capacity: 10-240 mm² Cu / 16-150 mm² Al
Max Width: 38 mm
Applicator Width: 8 mm
Power Source: 220 V 50 Hz
Weight: 160 kg
Dimensions: 700 x 860 x 1260 mm
- With locking device (for mechanical tools):
- No
- Inserts exchangeable:
- No
- Number of included inserts:
- 1 .
- With automatic return:
- Yes
- Compression force:
- 200 kN
- Suitable for:
- Cable lugs and connectors
- Construction/operation:
- Electrical
- Compression shape:
- Hexagon
DINFLEX-Y (LiYY) - Drum 500 m
Flexible electronic cable with fine wire conductor structure, as in combination with PVC sheath it provides a very flexible cable with a small bending radius. It is used for signal, measurement, control and tone-frequency transmission in electronics, computers and signal systems.
Structure Conductor: Blank stranded copper
Conductor insulation: PVC
Core identification: According to DIN 47100
Outer Sheath: PVC
Sheath identification: Grey
Technical data:
Rating voltage: 0.14 mm² = 350 V >; 0.14 mm² = 500 V
Test voltage: 0.14 mm² = 800 V >; 0.14 mm² = 1200 V
Temperature range: Fixed min/max: -30ºC to +70ºC (-22ºF to +158ºF)Moving min/max: -5ºC to +70ºC (-22ºF to +158ºF)
Radiation Resistance: 8 x 107 cJ/kg
Minimum bending radius: 10 x cable diameter
Oil resistance: Good
Flame resistance: IEC 332-1
- Number of cores:
- 2-37 .
- Material core insulation:
- Polyvinyl chloride (PVC)
- Specification core insulation:
- Other
- Core identification:
- Colour
- Protective conductor:
- No
- Material outer sheath:
- Polyvinyl chloride (PVC)
- Specification material outer sheath:
- Other
- Colour outer sheath:
- Other
- Flame retardant:
- According to IEC/EN 60332-1-2
- Permitted cable outer temperature after assembling without vibration:
- -30-70 °C
- Conductor material:
- Copper
- Twisted cores:
- Yes
- Max. conductor temperature:
- 70 °C
- Screen:
- No
- Armouring/reinforcement:
- None
- Insulation integrity:
- N/A
- Drain wire:
- No
- Nominal voltage:
- 500 V
- Halogen free:
- No
- Conductor category:
- Class 5 = flexible
- Colour:
- Black, Grey
- Material insulation:
- Polyvinyl chloride (PVC)
- Core colour:
- Several
- Conductor surface:
- Bare
- Halogen free:
- No
- Min. permitted bending radius, stationary application/permanent installation:
- 16-56.5 mm
- Reaction-to-fire according to EN 13501-6: Class:
- N/A
- Reaction-to-fire according to EN 13501-6: Smoke production:
- N/A
- Reaction-to-fire according to EN 13501-6: Flaming droplets/particles:
- N/A
- Reaction-to-fire according to EN 13501-6: Acidity:
- N/A
- Low smoke (according to EN 61034-2):
- No
- Low temperature resistant (according to EN 60811-504+505+506):
- No
- Oil resistant according to EN IEC 60811-404:
- No
DEF-Y (Defense)
Flexible signal cable with fine wire conductor structure, as in combination with PVC sheath it provides a very flexible cable with a small bending radius. It is used for signal, measurement, control and tone-frequency transmission in electronics, computers and signal systems.
Structure Conductor: Tinned copper
Conductor insulation: PVC
Core identification: According def 61-12.
Outer sheath: PVC
Sheath colour: Grey
Technical data:
Rating voltage: 300 V
Test voltage: 1000 V
Temperature range: Fixed min/max: -30ºC to +70ºC (-22ºF to +158ºF)Moving min/max: -5ºC to +70ºC (+23ºF to +158ºF)
Minimum bending radius: 15 x cable diameter
Oil resistance: Good
Flame resistance: IEC 228
- Number of cores:
- 2-25 .
- Material core insulation:
- Polyvinyl chloride (PVC)
- Specification core insulation:
- Other
- Core identification:
- Colour
- Protective conductor:
- No
- Material outer sheath:
- Polyvinyl chloride (PVC)
- Specification material outer sheath:
- Other
- Colour outer sheath:
- Other
- Flame retardant:
- According to IEC/EN 60332-1-2
- Permitted cable outer temperature after assembling without vibration:
- -30-70 °C
- Conductor material:
- Copper
- Twisted cores:
- Yes
- Max. conductor temperature:
- 70 °C
- Screen:
- No
- Armouring/reinforcement:
- None
- Insulation integrity:
- N/A
- Drain wire:
- No
- Nominal voltage:
- 300 V
- Halogen free:
- No
- Conductor category:
- Class 5 = flexible
- Colour:
- Black, Grey, White
- Material insulation:
- Polyvinyl chloride (PVC)
- Core colour:
- Several
- Conductor surface:
- Tinned
- Halogen free:
- No
- Min. permitted bending radius, stationary application/permanent installation:
- 17-44.5 mm
- Reaction-to-fire according to EN 13501-6: Class:
- N/A
- Reaction-to-fire according to EN 13501-6: Smoke production:
- N/A
- Reaction-to-fire according to EN 13501-6: Flaming droplets/particles:
- N/A
- Reaction-to-fire according to EN 13501-6: Acidity:
- N/A
- Low smoke (according to EN 61034-2):
- No
- Low temperature resistant (according to EN 60811-504+505+506):
- No
- Oil resistant according to EN IEC 60811-404:
- No
DEF-CY (Defense)
Flexible signal cable with fine wire conductor structure, as in combination with PVC sheath it provides a very flexible cable with a small bending radius. The cable is fitted with a screen of tinned copper wire, which protects against mechanical stress and particular it isolates all electrical frequency as well inside and outside the cable (EMC Directive).
It is used for signal, measurement, control and tone-frequency transmission in electronics, computers and signal systems.
Structure Conductor: Tinned copper
Conductor insulation: PVC
Core identification: Acc. to def 61-12.
Screen: Tinned copper braid
Outer sheath: PVC
Sheath colour: Grey
Technical data:
Rating voltage: 300 V
Test voltage: 1000 V
Temperature range: Fixed min/max: -30ºC to +70ºC (-22ºF to +158ºF)
Moving min/max: -5ºC to +70ºC (+23ºF to +158ºF)
Minimum bending radius: 15 x cable diameter
Oil resistance: Good
Flame resistance: IEC 228
- Number of cores:
- 2-36 .
- Material core insulation:
- Polyvinyl chloride (PVC)
- Specification core insulation:
- Other
- Core identification:
- Colour
- Protective conductor:
- No
- Material outer sheath:
- Polyvinyl chloride (PVC)
- Specification material outer sheath:
- Other
- Colour outer sheath:
- Other
- Flame retardant:
- According to IEC/EN 60332-1-2
- Permitted cable outer temperature after assembling without vibration:
- -30-70 °C
- Conductor material:
- Copper
- Twisted cores:
- Yes
- Max. conductor temperature:
- 70 °C
- Screen:
- Yes
- Armouring/reinforcement:
- Braiding
- Insulation integrity:
- N/A
- Drain wire:
- No
- Nominal voltage:
- 300 V
- Halogen free:
- No
- Conductor category:
- Class 5 = flexible
- Colour:
- Black, Grey, White
- Material insulation:
- Polyvinyl chloride (PVC)
- Core colour:
- Several
- Conductor surface:
- Tinned
- Halogen free:
- Yes, No
- Min. permitted bending radius, stationary application/permanent installation:
- 19-60.5 mm
- Reaction-to-fire according to EN 13501-6: Class:
- N/A
- Reaction-to-fire according to EN 13501-6: Smoke production:
- N/A
- Reaction-to-fire according to EN 13501-6: Flaming droplets/particles:
- N/A
- Reaction-to-fire according to EN 13501-6: Acidity:
- N/A
- Low smoke (according to EN 61034-2):
- No
- Low temperature resistant (according to EN 60811-504+505+506):
- No
- Oil resistant according to EN IEC 60811-404:
- No
Crimp tool - XL-Series
Pressverktyg i flera utförande med pressbackar från NCXD/DHD/DRG-serien. Utrustad med ergonomiska handtag.
Pressverktyget är en ratchettång som säkerställer att pressningen fullföljs. Returspärren har en release-hake ifall man vill avsluta pressningen.
Välj mellan att köpa ram och själv kombinera vilka pressbackar som ska medfölja eller något av våra färdiga koncept.
- Number of crimps:
- 1
- With locking device (for mechanical tools):
- Yes
- Inserts exchangeable:
- Yes, No
- Number of included inserts:
- 0-1 .
- With automatic return:
- Yes
- Cycle time:
- 2 s
- Suitable for:
- Cable end sleeves, Cable lugs and connectors, Screen connector, Various applications
- Construction/operation:
- Mechanical
- For component:
- Shrink terminals, End sleeves, Turned contacts, Deutsch, Insulated flagg terminal, Insulated terminals, Non-insulated terminals, roller compaction, Coaxial, Non-insulated Cu tube and sheet terminals, Modularplugg, Wirelås
- Compression shape:
- Trapezoid compression, Hexagon, Arbour clamping, Oval pressing, Notching, Roll compression (shrinking)
Automatic strip and crimp machine for ferrules
Automatic strip and crimp machine for insulated end sleeves 0.5-4 mm².
Stripping and crimping are carried out in a single step, which enables efficient and time-saving processing.
Technical data
Operation mode: Automatic trigger operation and manual operation
Twisting function: Yes
Wire size: 0.5-4 mm²
Stripping lenght: 3-17 mm
Max tube leght: 12 mm
Crimp shape: Quadrilateral crimp
Production capacity: 2.8 s/wire
Air Supply: 6-8 Bar
Power source: 220-240V AC/50HZ
Weight: 40 kg
Dimensions WxLxH: 350 x 450 x 400 mm
- Number of crimps:
- 1
- Strip length adjustable:
- Yes
- With locking device (for mechanical tools):
- No
- Inserts exchangeable:
- No
- Number of included inserts:
- 1 .
- With automatic return:
- Yes
- Cycle time:
- 2.8 s
- Suitable for:
- Cable end sleeves
- Adjustable conductor cross section:
- 0.5-4 mm²
- Function:
- Skin and crimp
- Type of drive:
- Electrical
- Strip length:
- 3-17 mm
- Construction/operation:
- Pneumatic
- Compression shape:
- Square compression
DINFLEX-CY (LiYCY)
Flexible electronic cable with fine wire conductor structure, as in combination with PVC sheath it provides a very flexible cable with a small bending radius. The cable is fitted with a screen of tinned copper wire, which protects against mechanical stress and particular it isolates all electrical frequency as well inside and outside the cable (EMC Directive). It is used for signal, measurement, control and tone-frequency transmission in electronics, computers and signal systems.
Structure Conductor: Blank stranded copper
Conductor insulation: PVC
Core identification: According to DIN 47100
Screen: Tinned copper braid
Outer Sheath: PVC
Sheath identification: Grey PETP-foil
Technical data:
Rating voltage: 0.14 mm² = 350 V > 0.14 mm² = 500 V
Test voltage: 0.14 mm² = 800 V > 0.14 mm² = 1200 V
Temperature range: Fixed min/max: -30ºC to +70ºC (-22ºF to +158ºF)Moving min/max: -5ºC to +70ºC (+23ºF to +158ºF)
Radiation Resistance: 8 x 107 cJ/kg
Minimum bending radius: 10 x cable diameter
Oil resistance: Good
Flame resistance: IEC 332-1
- Number of cores:
- 2-50 .
- Material core insulation:
- Polyvinyl chloride (PVC)
- Specification core insulation:
- Other
- Core identification:
- Colour
- Protective conductor:
- No
- Material outer sheath:
- Polyvinyl chloride (PVC)
- Specification material outer sheath:
- Other
- Colour outer sheath:
- Other
- Flame retardant:
- According to IEC/EN 60332-1-2
- Permitted cable outer temperature after assembling without vibration:
- -30-70 °C
- Conductor material:
- Copper
- Twisted cores:
- Yes
- Max. conductor temperature:
- 70 °C
- Screen:
- Yes
- Armouring/reinforcement:
- Braiding
- Insulation integrity:
- N/A
- Drain wire:
- No
- Nominal voltage:
- 500 V
- Halogen free:
- No
- Conductor category:
- Class 5 = flexible
- Colour:
- Grey
- Material insulation:
- Polyvinyl chloride (PVC)
- Core colour:
- Several
- Conductor surface:
- Bare
- Halogen free:
- No
- Min. permitted bending radius, stationary application/permanent installation:
- 18.5-64 mm
- Reaction-to-fire according to EN 13501-6: Class:
- N/A
- Reaction-to-fire according to EN 13501-6: Smoke production:
- N/A
- Reaction-to-fire according to EN 13501-6: Flaming droplets/particles:
- N/A
- Reaction-to-fire according to EN 13501-6: Acidity:
- N/A
- Low smoke (according to EN 61034-2):
- No
- Low temperature resistant (according to EN 60811-504+505+506):
- No
- Oil resistant according to EN IEC 60811-404:
- No
Crimp dies - CS30 series
CS30 dies suitable for WDT UP 14, UP 35 & CS 300 as well as Nemiq CrimpXchange Pro hand tool.
- Number of crimps:
- 1
- Application:
- Pipe cable lug and connectors, Insulated tube cable lug and connector, Cable compression lugs and connectors, Cable end sleeves
- Compression shape:
- Trapezoid compression, Arbour clamping, Oval pressing, Roll compression (shrinking)
Sortimentlåda TL10 med löstagbara avdelare
Sortimentlåda som med hjälp av mellanväggar(ingår) kan byggas från 4-10 fack.
Mått: 150 x 190 x 42 mm
Sortimentlåda TL20 med löstagbara avdelare
Sortimentlåda som med hjälp av mellanväggar(ingår) kan byggas från 5-20 fack.
Mått: 210 x 255 x 42 mm
Sortimentlåda TL26 med lösa insatser
Sortimentlåda bestyckade med lösa insatser som kan variera från 8-26 fack.
I lådan så ingår följande insatser:
TLI1: 8st
TLI1.5: 2st
TLI2: 4st
TLI4: 4st
Mått: 280 x 315 x 60 mm
SIF
Connecting cable with insulation of silicone rubber. The wire is particularly suitable as internal wiring in light fixtures, furnaces, heaters and appliances, where the wire is continuously exposed to high temperatures. The wire is halogenfree.
Packaging: Coil
Structure:
Conductors: Stranded tinned copper
Conductor Insulation: Silicone rubber
Core identification: The table below
Technical data:
Rated voltage: 300/500V
Test voltage: 2000V
Temperature range: -50ºC to +180ºC (-58ºF to 356ºF)
Minimum bend radius:
Moving: 12 x cable diameter
Fixed: 6 x cable diameter
- Number of cores:
- 1 .
- Material core insulation:
- Rubber
- Specification core insulation:
- Rubber - silicone rubber (SIR)
- Core identification:
- None
- Protective conductor:
- No
- Material outer sheath:
- None
- Specification material outer sheath:
- Other
- Colour outer sheath:
- Blue, Brown, Yellow, Grey, Green, Red, Black, White, Other
- Flame retardant:
- According to IEC/EN 60332-1-2
- Permitted cable outer temperature after assembling without vibration:
- -60-185 °C
- Conductor material:
- Copper
- Twisted cores:
- No
- Max. conductor temperature:
- 185 °C
- Screen:
- No
- Armouring/reinforcement:
- None
- Insulation integrity:
- N/A
- Drain wire:
- No
- Nominal voltage:
- 600 V
- Halogen free:
- Yes
- Conductor category:
- Class 6 = very flexible
- Single insulated/Double insulated:
- Single insulated
- Colour:
- Black, Green, Grey, Yellow, Green/yellow, Brown, Red, White, Blue
- Material insulation:
- Silicone
- Core colour:
- Blue, Brown, Yellow, Grey, Green, Green/yellow, Red, Black, White
- Conductor surface:
- Tinned
- Halogen free:
- Yes
- Packaging:
- Ring
- Min. permitted bending radius, stationary application/permanent installation:
- 7.5-19.2 mm
- Reaction-to-fire according to EN 13501-6: Class:
- N/A
- Reaction-to-fire according to EN 13501-6: Smoke production:
- N/A
- Reaction-to-fire according to EN 13501-6: Flaming droplets/particles:
- N/A
- Reaction-to-fire according to EN 13501-6: Acidity:
- N/A
- Low smoke (according to EN 61034-2):
- No
- Low temperature resistant (according to EN 60811-504+505+506):
- No
- Oil resistant according to EN IEC 60811-404:
- No
- Model:
- Bushing
- Max. current (Imax):
- 10-15 A
- Insulation:
- Not isolated
- Colour insulation:
- Other
- With cam clamp:
- No
- With tap spreader:
- No
- Material insulation:
- Other
- Material:
- Brass
- Neck type:
- Open barrel crimp
H01N2-D FT - Spool
Oil and weather resistant connection and welding cable. For use where the mechanical stresses are high, in both dry and wet conditions, indoors and outdoors.
Structure
Conductors: Extra-wide and fine wire tinned copper
Conductor Insulation: Rubber (Neoprene)Sheath
Colour: Black
Packaging: Spool, coil or drum
Technical dataRating voltage: 100V
Test voltage: 1000V
Temperature range: Fixed min/max: -40ºC to +80ºC (-40ºF to +176ºF) Moving min/max: -25ºC to +80ºC (-13ºF to +176ºF)
Minimum bend radius: 5 x cable diameter
Approvals: CE
- Number of cores:
- 1 .
- Material core insulation:
- Rubber
- Specification core insulation:
- Other
- Core identification:
- None
- Protective conductor:
- No
- Material outer sheath:
- None
- Specification material outer sheath:
- Other
- Colour outer sheath:
- Red, Black
- Flame retardant:
- According to IEC/EN 60332-1-2
- Permitted cable outer temperature after assembling without vibration:
- -20-80 °C
- Conductor material:
- Copper
- Twisted cores:
- No
- Max. conductor temperature:
- 80 °C
- Screen:
- No
- Armouring/reinforcement:
- None
- Insulation integrity:
- N/A
- Drain wire:
- No
- Halogen free:
- No
- Conductor category:
- Class 6 = very flexible
- Single insulated/Double insulated:
- Single insulated
- Core colour:
- Red, Black
- Conductor surface:
- Tinned
- Min. permitted bending radius, stationary application/permanent installation:
- 58.2-115.2 mm
- Reaction-to-fire according to EN 13501-6: Class:
- N/A
- Reaction-to-fire according to EN 13501-6: Smoke production:
- N/A
- Reaction-to-fire according to EN 13501-6: Flaming droplets/particles:
- N/A
- Reaction-to-fire according to EN 13501-6: Acidity:
- N/A
- Low smoke (according to EN 61034-2):
- No
- Low temperature resistant (according to EN 60811-504+505+506):
- No
- Oil resistant according to EN IEC 60811-404:
- No
WDT - Crimp dies
Pressbackar till WDT:s handverktyg samt maskiner.(till visa maskiner behövs adaptrar för att hålla backen).
Pressbackar till handverktyg 190942 eller maskin UP 35 & UP 60 med adapter.
- Number of crimps:
- 1
- Application:
- Pipe cable lug and connectors, Insulated tube cable lug and connector, Cable compression lugs and connectors, Cable end sleeves
- Compression shape:
- Trapezoid compression, Hexagon, Arbour clamping, Square compression, Oval pressing, Roll compression (shrinking)
KRT - Cable lugs with two stud holes - 10-500mm²
"2-holed copper tube lugs, KRT.
Copper tube lugs for stranded (class 5) and solid wires (class 2).
Material: 99.9% pure copper
Surface: > 4µ Sn
Inscriptions on the lugs palm can for ie be: n35-12T
n = nemiq // 35 = 35 wire // 12 = M12 stud size. // T = KRT, F = KRF, D = KRD
Inscriptions on the lugs neck can for ie be: 13
13 = Outside diameter of the neck (OD).
When crimping with hexagon dies neck inscription and die markings must conform."
- Suitable for Class 2 conductor:
- Yes
- Suitable for Class 5 conductor:
- Yes
- Insulated:
- No
- Max. current (Imax):
- 97-227 A
- Number of mounting holes:
- 2 .
- Flange shape:
- Ring shape
- Colour insulation:
- Other
- Slender flange model:
- No
- With sight-hole:
- Yes
- Conductor category:
- Several
- Max Temp:
- 150 °C
- Surface protection:
- Tinned
- Material:
- Copper
- Connecting angle:
- 180° (horizontal)
- Series:
- KRT/KST(10-500mm2)
Assortmentbox TL44 with loose containers
Assortment box with loose containers for 15-44 compartments.
Comes with:
TLI1: 14 pcs
TLI1.5: 2 pcs
TLI2: 7 pcs
TLI4: 7 pcs
Measures: 325 x 415 x 60 mm
Earthing braids
Economical and efficient protection of electrical equipment.Used for enclosure doors, motors, machine structures and control panels.Can handle temperature changes, shock, vibration and moving of components
Made of high conductivity tin-plated copper.Pressed ferrule ends for mechanical strength and reliability.
- Conductor material:
- Copper
- Shape of conductor:
- Flat
- Insulated:
- No
- Conductor category:
- Class 6 = very flexible
- Braided:
- Yes
- With connecting lugs:
- No
- Connection lugs drilled:
- Yes
- With cable lugs:
- No
Wire cutting and stripping machine - NTCS 70
NTCS 70 is an electrically powered wire cutting and stripping machine designed for both solid and multi-stranded cables. It is engineered to process cables with cross-sections ranging from 1.5 to 70 mm², with an productivity of up to 2500 pieces per hour.
Technical data:
Stripping capability: 3-layer stripping for shield cable
Wire material: Wide range of industrial wires
Conductor cross-section: 1.5-70 mm²
Cutting length 1-100,000 mm
Cutting length tolerance: < 0.002*L
Stripping length (side 1): 0-400 mm
Stripping length (side II): 0-180 mm
Slitting function: Optional
Maximum guide tube diamete: 20 mm
Display mode: 7-inch touch screen
Memory capacity: 100 programs
Blade material: High speed steel
Productivity: 1500-2500 pcs./h
Power supply: 220-240V AC / 50Hz
Power: 800 W
Weight: 80 kg
Dimension: 700 x 640 x 480 mm
- Strip length adjustable:
- Yes
- Adjustable conductor cross section:
- 1.5-70 mm²
- Function:
- Skin
- Type of drive:
- Electrical
- Strip length:
- 0.1-250 mm
RDO (H05RN-F)
H05RN-FConnection cable of rubber for use in power tools and light engineering equipment, which means high mechanical stresses occur, in both dry and humid rooms, even outdoors.
Structure:
Conductors: Extra stranded copper according to IEC 60228 class 5
Conductor Insulation: EPDM rubber
Sheath Colour: Black
Technical data:
Rated voltage Uo / U:H05RN-F: 300/500V
Test voltage: H05RN-F: 2000V
Insulation Resistance > 1 Gohma x cm
Core identification H05RN-F:
2-conductor: blue, brown
3conductor: Green / yellow, blue, brown
4-conductor Green / yellow, brown, black, gray
5-conductor Green / yellow, blue, brown, black, gray
Temperature range: Flexible -25ºC to +60ºC (-13ºF to +140ºF)
Minimum bend radius: Flexible 6 x cable diameter
- Number of cores:
- 2-3 .
- Material core insulation:
- Rubber
- Specification core insulation:
- Rubber - ethylene propylene rubber (EPR)
- Core identification:
- Colour
- Protective conductor:
- Yes, No
- Material outer sheath:
- Rubber
- Specification material outer sheath:
- Rubber - chlorinated/chlorosulfonated polyethylene (CPE/CSP)
- Colour outer sheath:
- Black
- Flame retardant:
- According to IEC/EN 60332-1-2
- Permitted cable outer temperature after assembling without vibration:
- -25-60 °C
- Conductor material:
- Copper
- Twisted cores:
- No
- Max. conductor temperature:
- 60 °C
- Screen:
- No
- Armouring/reinforcement:
- None
- Drain wire:
- No
- Nominal voltage:
- 500 V
- Halogen free:
- No
- Conductor category:
- Class 5 = flexible
- Single insulated/Double insulated:
- Double insulated
- Colour:
- Black
- Material insulation:
- EPDM
- Core colour:
- Several
- Conductor surface:
- Bare
- Halogen free:
- No
- Min. permitted bending radius, stationary application/permanent installation:
- 33-41 mm
- Reaction-to-fire according to EN 13501-6: Class:
- N/A
- Reaction-to-fire according to EN 13501-6: Smoke production:
- N/A
- Reaction-to-fire according to EN 13501-6: Flaming droplets/particles:
- N/A
- Reaction-to-fire according to EN 13501-6: Acidity:
- N/A
- Low smoke (according to EN 61034-2):
- No
- Low temperature resistant (according to EN 60811-504+505+506):
- No
- Oil resistant according to EN IEC 60811-404:
- No