Kontakter till STC-serien från TE.

Material: CuNiSi

Bolted cable lugs of aluminiumcopper The terminal is constructed in principle as Al-lug, but has a pressed copper bushing in the connecting plate. The joint between aluminium and copper-section is homogeneous and completely corrosion proof. The external transition is insulated with weather-resistant materials. Material: Contact Upper, contact base: High-strength aluminium alloy Bolts and washers: Hot-dip galvanized steel Bushing: Copper Tightening torque: 22 Nm

Innehåller 6 miniboxar och ett stativ för väggmontering. LSTTR 2.4 LSTTR 3.2 LSTTR 4.8 LSTTR 6.4 LSTTR 12.7 LSTTR 25.4 Höjd = 260 mm Bredd = 340 mm Djup = 175 mm

RNF-100 is a polyolefin heat shrink tubing with a very high quality. RNF-100 has a mix of physical, chemical and electrical properties that make it suitable for use within a very wide area. The product is approved to a wide range of military and industrial standards. Applications: Used very heavily in military equipment, as thin cable protection, electrical insulation, colour coding, identification, moisture protection and mechanical strength. Material: Polyolefin Temperature range: -55° C to +135° C Lowest shrink temperature: +95° C Wall thickness: Thin wall Shrink ratio: 2:1 Self-extinguishing: Yes, not clear

Nelcon is a strong, flexible, heat shrink tubing for universally use. Nelcon has good resistance to fluids and solvents, and good dielectric strength. Shrink ratio at 2:1 and 3:1, and the tubes unique combination of chemical, electrical and physical properties it is suitable for a variety of uses. Applications: Electrical insulation, strain relief, bundling, mechanical protection, colour coding of wires, cables, tubes and electronic components. Material: Polyolefin Temperature range: -40° C to +135° C Lowest shrink temperature: +120° C Wall thickness: Thin wall Shrink ratio: 2:1 Self-extinguishing: Yes

Applications:Standard heat shrink tubing with 3:1 shrink ratio. Good physical, chemical and electrical properties that meet industry standards for heat shrink tubing.Material: PolyolefinTemperature range: -55 degrees Celsius to +135 degrees Celsius Lowest shrink temperature: +80 degrees Celsius Wall thickness: Thin wallShrink ratio: 3:1Self-extinguishing: Yes, not clear

Material: CuNiSi, silverpläterad

Mycket flexibel krympslang som krymper redan vid låga temperaturer. Detta gör att slangen kan appliceras snabbt och den är även lämplig att använda i närheten av andra temperaturkänsliga material. Användningsområden: Isolering av ledningsanslutningar, färgkodning, skydd av värmekänsliga detaljer, dekorativa överdrag, mekaniskt skydd. Material: Polyolefin Färg: Svart Arbetstemperatur:-40° C till +125° C Lägsta krymptemperatur: +110° C Väggtjocklek: Tunnväggig Krympgrad: 2:1 Självslocknande: Nej

Atum is a double wall heat shrink tubing with adhesive. Applications: Atum is used where a moisture-tight encapsulation and isolation is desired, such as over power lines ramifications and other electrical components. Material: Polyolefin with adhesive Colour: Black Temperature range: -55° C to +110° C Lowest shrink temperature: +80° C Wall thickness: Thin wall, double wall with adhesive Shrink ratio: 4:1 Self-extinguishing: Yes

Nelcon is a strong, flexible, heat shrink tubing for universally use. Nelcon has good resistance to fluids and solvents, and good dielectric strength. Shrink ratio at 2:1 and 3:1, and the tubes unique combination of chemical, electrical and physical properties it is suitable for a variety of uses. Applications: Electrical insulation, strain relief, bundling, mechanical protection, color coding of wires, cables, tubes and electronic components. Material: Polyolefin Temperature range: -40° C to +135° C Lowest shrink temperature: +120° C Wall thickness: Thin wall Shrink ratio: 3:1 Self-extinguishing: Yes

Atum is a double wall heat shrink tubing with adhesive. Applications: Atum is used where a moisture-tight encapsulation and isolation is desired, such as over power lines ramifications and other electrical components. Material: Polyolefin with adhesive Colour: Black Temperature range: -55º C to +110º C Lowest shrink temperature: +80º C Wall thickness: Thin wall, double wall with adhesive Shrink ratio: 3:1 Self-extinguishing: Yes

Användningsområden: Innerväggen smälter vid uppvärming och isolerar mot fukt och intrång av vätskor. Hög krympgrad och självslocknande. Material: Polyolefin Färg: Svart Arbetstemperatur: -55º C till +125º C Lägsta krymptemperatur: +80º C Väggtjocklek: Tunnväggig, dubbelvägg med lim Krympgrad: 4:1 Självslocknande: Ja

Användningsområden: Flexibel krympslang för enkla applikationer med liten mekanisk påverkan. Material: Polyolefin Färg: Svart Arbetstemperatur: -55º C till +135º C Lägsta krymptemperatur: +70º C Väggtjocklek: Tunnväggig Krympgrad: 2:1 Självslocknande: Ja

Atum is a double wall heat shrink tubing with adhesive. Applications: Atum is used where a moisture-tight encapsulation and isolation is desired, such as over power lines ramifications and other electrical components. Material: Polyolefin with adhesive Colour: Black Temperature range: -55º C to +110º C Lowest shrink temperature: +80º C Wall thickness: Thin wall, double wall with adhesive Shrink ratio: 3:1 Self-extinguishing: Yes

Very flexible heat shrink tubing to shrink even at low temperatures. This means that the hose can be applied quickly and it is also suitable for use in the vicinity of other temperature sensitive materials. Applications: The isolation of fluid connections, color coding, the protection of heat sensitive parts, decorative coating, mechanical protection. Material: Polyolefin Colour: Black Temperature range: -40° C to +125° C Lowest shrink tempearture: +110° C Wall thickness: Thin wall Shrink ratio: 2:1 Self-extinguishing: No

Atum is a double wall heat shrink tubing with adhesive. Applications: Atum is used where a moisture-tight encapsulation and isolation is desired, such as over power lines ramifications and other electrical components. Material: Polyolefin with adhesive Colour: Black Temperature range: -55º C to +110º C Lowest shrink temperature: +80 º C Wall thickness: Thin wall, double wall with adhesive Shrink ratio: 3:1 Self-extinguishing: Yes

MCP 1.5 hane Material: CuFe2, förtent

Användningsområden: Gul/grön krympslang av polyolefin identifiering av jord. Material: Polyolefin Färg: Grön/gul Arbetstemperatur: -55º C till +155º C Lägsta krymptemperatur: +95º C Väggtjocklek: Tunnväggig Krympgrad: 2:1 Självslocknande: Ja

202 K Raka formgods. Se nedan under "Datablad", för specifikationer.