Spänningskabel 12 V 2 A
Spänningskabel med DC-kontakt.
Universalstickpropp med 2 A säkring och ledning 2 x 0,4 mm² L=2 m
I två utföranden med
DC kontakt 2.1 x 5.5 mm
DC kontakt 2.5 x 5.5 mm
Universalstickpropp vinklingsbar 180° med strömbrytare och kabel 12-24 V
Passar cigarettändar- och DIN normuttag.
Bajonettfastsatt utjämningshylsa.
Kabel: 2 x 0,75mm², Längd 2 m
Med utbytbar 8 A säkring.
Universalstickpropp vinklingsbar 180° med dragavlastning, 12-24 V.
Passar cigarettändar- och DIN normuttag.
Bajonettfastsatt utjämningshylsa.
Med utbytbar 8 A säkring.
Skruvanslutning och dragavlastning.
Cigg-uttag x 2 samt USB-uttag Typ A x 1 för utanpåliggande montage med skarvsladd och cigg/DIN- propp
Matning: 8-34V
Cigg-uttag: 12-24V
Kabel: 2 m, 2 x 1,5 mm²
Storlek (L x B x H): 85 x 95 x 38 mm
Finns i flera utförande, enkla eller dubbla USB-A uttag. Se teknisk data nedan.
175467335000: USB-uttag max: 3A,, 5VDC
Förbrukning i "stand by läge": <5mA
175467325000: Uttag max: 5A, (2 x 2,5A) 5VDC
Uttag kontinuerligt: 4,4A, (2 x 2,2A) 5VDC
Förbrukning i "stand by läge": <5mA
3-vägs skarvkabel 2 x 1.5 mm², 2 m. Med universalstickpropp.Inkl. 16 A säkring och 3 vägs skarvuttag D=21 mm, cigarettändaruttag.12-24 V, 16 A.
Fabrikat: Pro Car
Tvåvägsförgrening med två cigarettändaruttag, D=21 mm. Max. 2 x 8 A / 12-24 V. Anslutning via flatkabel 2 x 0.75 mm², L=0.25 m till universalstickpropp med 16 A säkring.
Fabrikat: Pro Car
Cigg/DIN propp med förlängningskabel och cigg-uttag
12-24V 8A utbytbar säkringKabel: 2 x ,75 mm²
Finns i flera utföranden med olika kablar. Se nedan.
175467814100: Kabel: 4 m
175467818100: Spiralkabel: 0,6-3 m
USB-uttag, runda för infällt montage.
Matning: 12-24 volt DC.
Skyddad mot kortslutning, överspänning(max 53V), överhettning och felvänd polanslutning.
Anslutningar: Ca.15 cm kabel, 0.5 mm².
12-24 V DC, output 5 V DC, with integrated voltage converter. With blue control LED that shows voltage.
Protection against: reverse polarity, overload, over temperature, overvoltage, short-circuit.
Input: 8-34 V DC
E1-approval.
Port: 2 x USB-A
Output max. 2 x 2.5 A (2 x 12.5 watts)
Current consumption: < 3 mA
Fastening by screws, cable connection pre-assembled approx. 15 cm, 2 x 0.5 mm²
Dimensions: Ø 59 mm x Height 24 mm
175467327000: With blue control LED that shows voltage.
175467327100: With cap
12-24 V DC, fitting for standard sockets (Ø 12 mm) following DIN EN
ISO 4165.
Optimal contacting, tight fit in the socket. For connecting additional devices, max. load up to 16 A.
With screwed strain relief, screw terminals up to 2.5 mm².
Cable passage: Ø 7.5 mm.
DUSPOL EXPERT
Spännings- och genomgångsprovare med fasföljdsvisning och lastinkoppling.
Indikeringssteg: 12, 24, 50, 120, 230, 400, 690 V LED
Fasföljdsvisning och fasprovning på LCD, polaritetsindikering på LED.
Vibrationslarm för spänningsavkänning.
Punktbelysning för mörka mätplatser.
Drivs av 2 st AAA batterier.
Temperaturområde: -10º C till +55º C
Skyddsklass: IP64
Godkännanden: IEC/EN 61243-3 (DIN VDE 0682-401)
DUSPOL DIGITAL PLUS
Digital spänningsprovare med fasföljdsvisning och lastinkoppling.
Belyst 3-siffrig LCD-display för lik- och växelspänning.
Fasföljdsvisning och fasprovning på LCD, polaritetsindikering på LED.
Vibrationslarm för spänningsavkänning.
Punktbelysning för mörka mätplatser.
Mäter steglöst lik- och växelspänning från 1.5-750 V.
Drivs av 2 st AAA batterier.
Temperaturområde: -10º C till +55º C
Skyddsklass: IP64
Godkännanden: IEC/EN 61243-3 (DIN VDE 0682-401)
DUSPOL ANALOG
Analog spänningsprovare med fasföljdsvisning och lastinkoppling. Indikering av lik- och växelspänning med LED samt steglöst genom en dykspolevisare.
Indikeringssteg: 12, 24, 50, 120, 230, 400, 690, 1000 V
Fasföljdsvisning och fasprovning på LCD, polaritetsindikering på LED.
Mäter likspänning från 12-750 V och växelspänning från 12-690 V.
Temperaturområde: -10° C till +55° C
Skyddsklass: IP64
Godkännanden: IEC/EN 61243-3 (DIN VDE 0682-401)
Voltage Tester and Continuity Tester PROFIPOL®+, with impact-proof and robust housing.
Voltage: 12 V - 690 V AC/ DC (LED)
Display stages: 12, 24, 50, 120, 230, 400, 690 V AC / DC (voltage display even in case of empty batteries)
Acoustic and optical continuity test up to 100 kΩ (buzzer / yellow Ω-LED)
Single-pole external conductor test (phase) (red LED)
Polarity indication (+ /- LED)
Non-contact phase tester/ detector of cable breaks (yellow LED)
Detent pin for one-hand operations e.g. for voltage test in sockets and safe storage of the voltage tester.
Protection: IP 54 (dust/splash proof). Built and approved acc. to IEC / EN 61243-3:2015. Over voltage category CAT III 600 V, CAT II 690 V.
Incl. 2 x 1.5 V micro batteries (LR03 / AAA)
Continuity and Circuit Tester DUTEST® pro
For testing of high-and low-resistance
the result of the continuity test and diode test is shown via LED and buzzer
optical indicator of resistance by 3 LED’s: 0 - 100 Ω/1 kΩ/ 10 kΩ
acoustic indication via testing buzzer up to approx. 100 Ω
external-voltage indication: 6 V - 400 V
polarity indication
single-pole external conductor test (phase)
non-contact cable break detector
pinpointed high luminous power LED torch
buzzer and LED power are individual adjustable in 4 steps
rear of the unit with magnet and belt clip
measurement category: CAT lll 300 V
3M™ Temflex™ Tape 155 is an affordable solution for everyday cable marking, insulation and bundling in various environments.
Perfect for general daily taping needs.
3M™ Temflex™ 165 Vinyl Electrical Tape is a good quality, 0.15 mm thick, multi‑purpose vinyl insulating tape.
It has a great resistance to moisture and varying weather conditions. It is a polyvinyl chloride (PVC) that is flame-retardant and comfortable. 3M™ Temflex™ 165
3M™ Temflex™ 165 Vinyl Electrical Tape is a good quality, 0.15 mm thick, multi‑purpose vinyl insulating tape.
It has a great resistance to moisture and varying weather conditions. It is a polyvinyl chloride (PVC) that is flame-retardant and comfortable. 3M™ Temflex™ 165
3M™ Temflex™ 175 Vinyl Electrical Tape is a premium grade, 0.18 mm thick, high-performance general-purpose flame-retardant vinyl insulating tape.
It is designed to perform in ambient temperatures up to 90°C. The tape is conformable for cold weather application down to -10°C. It has excellent resistance to abrasion, moisture, alkalis, acid, copper corrosion and varying weather conditions. The combination of an elastic PVC backing and pressure-sensitive rubber-based adhesive provides electrical and mechanical protection with minimum bulk.
Scotch® 35™ Vinyl Electrical Tape is a polyvinyl chloride (PVC) colour coding tape. Outstanding electrical and mechanical properties make this tape suitable for use in phase identification, colour coding of motor leads and piping systems, and for marking safety areas. Scotch® 35™ Vinyl Electrical Tape operates over a wide range of temperatures up to 105°C. The tape is conformable for cold weather applications down to -10°C.
UL-Listed, CSA approved and has a VDE Marks License for IEC 60454-3-1-6/F-PVC P/90.
This tape is available in nine fades resistant colours.
We are using Cookies to give you a superior user experience. If you want to find out more about cookies and how we use them, please go to our cookie page. Further browsing of this site indicates that you accept our cookie policy.