Pins size 16 for DT04 connector housings.

DEUTSCH DTM Series connectors are the answer to all of your smaller wire gauge applications. Building on the DT design strengths, the DTM connector line was developed to fill the need for lower amperage, multi- pin, inexpensive connectors. The DTM Series offers the designer the ability to use multiple size 20 contacts, each with 7.5 amp continuous capacity, within a single shell.

DEUTSCH DTP Series connectors are the solution for your power application requirements. Building on both the DT and DTM design strengths, the DTP connector line was developed to fill the need for higher amperage, multi-pin, inexpensive connectors. The DTP Series offers the designer the ability to use multiple size 12 contacts, each with a 25 amp continuous capacity, within a single shell. The DTP connectors are currently available in two and four pin configurations.

DEUTSCH DTP Series connectors are the solution for your power application requirements. Building on both the DT and DTM design strengths, the DTP connector line was developed to fill the need for higher amperage, multi-pin, inexpensive connectors. The DTP Series offers the designer the ability to use multiple size 12 contacts, each with a 25 amp continuous capacity, within a single shell. The DTP connectors are currently available in two and four pin configurations.

DEUTSCH DTP Series connectors are the solution for your power application requirements. Building on both the DT and DTM design strengths, the DTP connector line was developed to fill the need for higher amperage, multi-pin, inexpensive connectors. The DTP Series offers the designer the ability to use multiple size 12 contacts, each with a 25 amp continuous capacity, within a single shell. The DTP connectors are currently available in two and four pin configurations.

DEUTSCH DT Serien erbjuder pålitlighet och robust kvalitet. DT-designstyrkorna inkluderar valfri flänsmontering, flerpinnararrangemang, lägre kostnad och flexibilitet i design. DT-serien erbjuder designern möjligheten att använda flera kontakter med storlek 16 för kabelarea från 0.5-2.5mm², vardera med 13A kontinuerlig kapacitet.

DEUTSCH DTM Series connectors are the answer to all of your smaller wire gauge applications. Building on the DT design strengths, the DTM connector line was developed to fill the need for lower amperage, multi- pin, inexpensive connectors. The DTM Series offers the designer the ability to use multiple size 20 contacts, each with 7.5 amp continuous capacity, within a single shell.

Assortment with Deutsch connectors. AS DT-300 contains approx. 300 pcs with components to 2-3 pol DT-connectors. AS DT-700 contains approx. 700 pcs with components to 2-8 pol DT-connectors.

Kit med relä, hållare och kontakter.

Blades in stainless steel for most brands of robotic lawn mowers. Screws are included.

Repair kit for signal cable. Includes: 5 m signal cable 15 pcs ground nails/pegs 3 pcs pigtail connector 3 pcs single-conductor connectors

Sortiment med 70 och 200 mm långa krympslangslängder i färgerna svart, röd, blå, vit och gul. Totalt 87 längder. Ø före Ø efter krympning 2.4 / 1.2 mm 3.2 / 1.6 mm 4.8 / 2.4 mm 6.4 / 3.2 mm 9.4 / 4.8 mm 12.7 / 6.4 mm 19.0 / 9.5 mm Krymptemperatur: från 120° C till 200° C Genomslagshållfastighet: 20 kV/mm

28st klämmor enligt nedan: 10st Oisolerade krokodilklämmor 6st Isolerade 1 1/2" krokodilklämmor 6st Isolerade 2" krokodilklämmor 2st Laddklämma 10A 2st Laddklämma 25A 2st Laddklämma 30A B x D x H: 210 x 110 x 30 mm Med Eurohål för butiksexponering.

Lighting connector for both solid and stranded cable. No tool needed. Stripping length: 11 mm Contact resistance: ≤0. 015 Ω Insulation resistance: ≥1000 MΩ Material Contact: Copper Plastic parts: PC (Polycarbonate) Spring: Stainless steel

Protect your chain lighting effectively by using transparent protective tape. Applications: Used as temporary protection for smooth surfaces of PVC, polycarbonate (PC), melamine, brass, anodized aluminum, and stainless steel (anodized and galvanized). Specifications: Material: LDPE film Adhesive: Acrylic Thickness: 0.045 mm Adhesion Strength: 0.90 N/10 mm Color: Transparent

The battery can be connected/disconnected within seconds, while connectors durability are equivalent to those designed for permanent connection. The design is ideal for tight confined spaces where installation can be challenging. The connectors plastic covers eliminate risk of electric shock and protect battery poles. The connectors are designed to accomodate jump cables while connected to the battery. Fits all SAE and DIN standard batteries. Corrosion-resistant materials. Available in tinned and untinned brass. No tools are required. A 15 mm end sleeve is recommended to keep the strands together and increase pull-out strength. Cable area: 6 - 50 mm² Pole size: (+) 19 mm, (-) 17 mm Voltage: 24VDC. Max Current: 140A Comes in set of 2 zip-lock bag.

BTLP-series Battery terminals with 18 mm stud. Tin plated brass. Pol size: (+) 19 mm, (-) 17 mm Bolt: M8x18 mm or M10x18 mm.