The sets includes: CC 22 - Cable cutter with double jaws that cuts and strips copper and aluminium cable. KS 4T - Aluminum pruner with teflon-coated blades. Equipped with return spring. NCX IEUF or NCX IEUT - CrimpXChange Electric is a high-quality ratchet crimping tool that ensures proper crimping. It comes with three sets of dies for the most common types of terminal crimps. Dies in NCX IEUF: NCXD I0560 - for insulated cable lugs 0.5-6.0 mm² NCXD E0510 - for wire end ferrules 0.5-10 mm² NCXD UF0510 - for non-insulated cable lugs and copper tube lugs (KSF/KRF) 0.5-10 mm² Dies in NCX IEUT: NCXD I0560 - for insulated cable lugs 0.5-6.0 mm² NCXD E0510 - for wire end ferrules 0.5-10 mm² NCXD UT0510 - for non-insulated cable lugs and copper tube lugs (KST/KRT) 0.5-10 mm²

Press tool suitable for work in tight spaces and for installers with small hands. Available in multiple versions equipped with 1 set of dies. The press tool is a ratchet pliers that ensures the completion of the pressing. The return lock has a release hook in case you want to terminate the pressing.

Tool for efficiency and flexibility in a wide range of tasks. Our battery-powered tool is designed to be adaptable with various heads, allowing you to handle multiple work areas with a single device. Switch between different heads to perform tasks ranging from hexagonal crimping of cable lugs from 16-400 mm² Cu & 16-300 mm² Al with the HX400, to a powerful cable cutter that cuts up to 45 mm Cu and 40 mm ACSR with the CC40. For convenience, we sell both the machine and the heads separately as well as complete machines, enabling you to purchase according to your needs. NGB2 Usage Areas: HX400 - Seamless hexagonal crimping for cable lugs and splice connectors from 16-400 mm² Cu & 16-300 mm² Al. CC40 - Cable cutter that cuts up to 45 mm Cu and 40 mm ACSR.

The NSBT IC400 is a battery-powered crimping tool for copper and aluminum cable lugs without any need of changing dies. The same crimping dies are used from 16-400 mm² for copper and 50-400 mm² for aluminum. The NSBT IC400 operates with a V-crimp system, making it compatible with most types of cable lugs and sleeves. The tool continues to apply pressure until the correct resistance is reached, which means it crimp a bit further if the physical area of the cable is slightly off (a common issue today as cable area is now often determined by conductivity rather than physical size). Crimps performed with this tool meet standards IEC 61238-1 and SEN 24 50 10/12. The tool comes in a durable case with battery, charger, shoulder strap, and a test rod. The test rod is used to verify that the crimping tool is correctly calibrated. Optional accessories for the NSBT IC400 include pre-forming dies and C-sleeve dies for additional functionality. - Rotatable crimping head allows operation even in confined spaces. - The piston automatically returns but can be stopped at any position, reducing cycle time as it doesn’t need to fully reset. - No time for changing die and no investment in dies for different sizes, resulting in less to carry and keep track of. - Equipped with a Bosch Li-Ion battery with an indicator. - LED to facilitate work in dimly lit areas. Technical data: Max pressure: 700 bar Crimping force: 109 kN Capacity: 16-400 mm² Cu / 50-400 mm² Al

NGB2 WC45 är ett batteridrivet kapverktyg för kabel och vajer. Verktyget är utrustat med ett 180° roterbart huvud. Levereras med ett batteri och en batteriladdare i en slitstark plastlåda. Verktyget kan max kapa följande: Vajer 6x7: 40 mm Vajer 6x12: 40 mm Vajer 6x19: 40 mm Mjuk kopparstång: 32 mm Mjuk aluminiumstång: 40 mm CU kabel: 40 mm AL kabel: 40 mm ACSR: 40 mm Får ej användas på pianotråd. Batteri: 18 VDC Li-Ion med batteriindikator Presskraft: 95.5 kN Maxtryck: 700 bar

NGB2 WC55 är ett batteridrivet kapverktyg för kabel och vajer. Verktyget är utrustat med ett 180° roterbart huvud samt en axelrem/sele. Levereras med ett batteri och en batteriladdare i en slitstark plastlåda. Verktyget kan max kapa följande: Vajer 6x7: 25 mm Vajer 6x12: 30 mm Vajer 6x19: 30 mm Mjuk kopparstång: 35 mm Mjuk aluminiumstång: 28 mm Armeringsstång: 19 mm CU kabel: 54 mm AL kabel: 54 mm ACSR: 40 mm Staglina 1x7: 15 mm Staglina 1x19: 20 mm Underjordisk kabel: 50 mm Får ej användas på pianotråd. Batteri: 18 VDC Li-Ion med batteriindikator Presskraft: 124.6 kN Maxtryck: 700 bar

Automatisk skal- och pressmaskin för oisolerade ändhylsor 0.5-4 mm². Avisolering och kontaktpressning utförs i ett enda moment, vilket möjliggör en effektiv och tidsbesparande bearbetning. Tekniska data Driftläge: Automatisk triggerdrift och manuell drift Twist-funktion: Ja Kapacitet: 0.5-4 mm² Avisoleringslängd: 3-17 mm Max längd ändhylsa: 12 mm Kompressionsform: Fyrkantpressning Produktionskapacitet: 2.8s/kabel Lufttillförsel: 0.6-0.8Mpa Strömkälla: 220-240V AC/50Hz Vikt: 40 kg Mått BxLxH: 350 x 450 x 400 mm

Steel cable tie tool with very good functionality and precision for stainless cable tie with width max 10mm and thickness 0.3 mm. Using single hand to operate the tension and cutting. Tensioning reel is designed to collect the extra tie and prevent the tie to rebound. Used for the following cable ties: Type ST2, LS, AE 6xx. Length: 127 mm