Kabelspolningsmaskin för upprullning på bobin eller ring. Inställbar längd med automatiskt klipp. Ställbar för olika storlek av bobin/ring gällande bredd & kärna Variabel hastighet. Max vikt för maskin: 15 kg Kabeldiameter: 1-20 mm Lindningshastighet: 1-8 varv/s Färdig Bobin/Ring ID: 50-300mm Färdig Bobin/Ring YD: < 400mm Inbyggt buntning av ringar. 0.7s/buntning.

Kabelspolningsmaskin för upprullning på bobin eller ring. Inställbar längd med automatiskt klipp. Ställbar för olika bredder, kärnor samt hastighet. Kabeldiameter:1-18mm Bobin YD: 220/280/320/350mm för större YD än 350mm kan anpassas. Färdig ring ID: 50-300mm Färdig ring YD: <500mm Färdig ring höjd: <200mm Max vikt för maskin: 50 kg Lindningshastighet: 1-8 varv/s Strömförsörjning: 220-240 V Effekt: 2.5kW

Automatisk avrullare som automatiskt reglerar fart och minimerar risken för att sträcka kabeln vid spolning. Trumdiameter YD: Max 700mm Trumdiameter ID: 120-300mm Max trumbredd: < 200mm Kabel diameter:< 6.0mm Matningshastighet: 360 varv/min Max vikt för maskin: 50 kg

Automatisk avrullare som automatiskt reglerar fart och minimerar risken för att sträcka kabeln vid spolning. Trumdiameter YD: Max 650mm Trumdiameter ID: 31-70mm Max trumbredd: <450mm Kabel diameter: Max vikt för maskin: 90 kg

Automatisk avrullare som automatiskt reglerar fart och minimerar risken för att sträcka kabeln vid spolning. Trumdiameter: 200-700mm Max trumbredd: 800mm Max Kabel diameter: 30mm Max vikt för maskin: 300kg

Enkel avrullare för kabel och slang som ligger på ring.

Automatisk avrullare som automatiskt reglerar fart och minimerar risken för att sträcka kabeln vid spolning. Trumdiameter YD: 500mm Trumdiameter ID: 120-300mm Max trumbredd: < 200mm Kabel diameter:< 6.0mm Max vikt för maskin: 20kg

Extension cord for 12V PV Solar panels or serial connection of multiple solar panels. Maximum distance between panel and regulator is 10 m.

Extra tips for DFNK 20 and DFA KIT. Includes: 1 piece Search coil with ball 1 piece Pull plug 1 piece Search coil with pull loop 1 piece Basic pull sock 1 piece Pull hook • Search coil with ball - The search coil is flexible and can easily navigate around curves. • Pull plug - When pulled, the sock tightens and holds onto the cable. • Search coil with pull loop - The guide head is equipped with a loop where individual wires can be easily attached. • Basic pull sock - Pulls cables of any diameter. Easily attach the cable by forming a figure-eight with the loop and threading the cable through

High quality crimping tool. CrimpXchange is available in several combinations with a frame equipped with crimping dies from the NCXD / DHD / DRG series. Two more pairs of NCXD crimping dies can be stored in the handles. Exchange of crimping dies is quick and easy with the release buttons on the front of the tool, no other tools are needed. CrimpXchange is a ratchet crimping tool which ensures that thecrimping is completed. Equipped with ergonomic handles. Length: 235 mm. Choose between buying the frame and combine the crimping dies of your choice or buying one of our ready-made concepts. Available in several ready-made alternatives equipped with 1 set of dies for crimping of: - Deutsch- Insulated terminals.- End sleeves- Heatshrink insulated butt splices- Uninsulated terminals with open barrel (roller compaction)- Uninsulated copper tube splices and cable lugs (KST/KRT/KSF/KRF)

The NTHC HX400 is a user-friendly hexagon crimp machine designed for seamless operation on copper and aluminum cable lugs without the need for die changes. Cable lugs and splices can be crimped using the same dies from 10-400 mm² for copper and 16-300 mm² for aluminum. The NTHC HX400 works with high-precision hexagon crimping, simultaneously compressing all sides to minimize the risk of wings forming. Selecting the right crimping option is easy with the touchscreen interface. Compact pcsructure for space-saving. Technical Specifications: Pressing Force: 200 kN Capacity: 10-400mm² Cu / 16-300mm² Al Max Width: 38 mm Die Width: 8 mm Power Source: 220V 50Hz Weight: 160 kg Dimensions: 700 x 860 x 1260 mm

NTCS 00340 is a electrically powered stripping machine for solid and multi-stranded cabled. NTCS 00340 is designed to process cables with cross-sections ranging from 0.03 to 4mm² with a absolute precision. Technical data: Max. Stripping length: 20mm Diameter setting accuracy: 0.01mm Processing time: 2pcs/s Available cross section: 0.03-4mm2 Stripping accuracy: Entire-strip: 0.5mm, Half-strip: 6mm Weight: 4.5kg Dimension: 380 x 85 x 188 mm Power supply: 220-240V AC / 50Hz

Terminal block for both solid and stranded cable. No tool needed. Solid cables can be pushed in without opening the lever. Stripping range: 10-14 mm Contact resistance: ≤0. 015 Ω Insulation resistance: ≥1000 MΩ Material Contact: Copper Plastic parts: PC (Polycarbonate) Spring: Stainless steel

Edge clips can, for example, be used where there is no possibility of mounting holes or where there are difficulties for adhesive to adhere. These products are used for fixing cables, hoses & pipes. Commonly used in the automotive industry, cable manufacturers, cabinet builders, and other industries. The clips comes without cable ties. - For Edge thickness 1-3mm or 3-6mm. - Cable ties with inner or outer serrations can be used. - Cable ties can run along or across the edge (direction can be turned). - For 3.6 or 4.8mm cable ties. Material edge clips: PA66HIRHS UV

Either with 2 x Pin+pin housing & 1 x Socket+socket housing or 1 x Pin+pin housing & 2 x sockets+sockethousings. Pin/Socket: Tinned cupper Max voltage: 1500V Max current: 30A IP68 UV resistant according to ISO 4892-2 Tested according to IEC 62582

Cable ties to be used with automatic bundling system. To be used where volumes are high for ex. within harness manufacturing or automotive industry. Compatible with NCTM LCT-machines for applicable length/width of cable tie. Comes as natural or black weather resistant.

Automatic bundling system which can be used on desk with foot pedal or handheld with finger trigger. Cable ties are put in the feeder and vibrates until they come in the right direction. Then they are transported by pneumatics via hose to the applicator head. The jaws close over the cables and the cable tie is tightened and cut off automatically and the leftover ends up in a plastic container. The machine works for cable ties in the LCT series. Standard cable ties cannot be used. Technical data: Adjustable bundling pressure. Automatic cut-off. Cycle time approx 1s Different budling diameters within cable tie tolerances without changed settings. Air pressure: 6 bar. Voltage: 220-230 VAC 50/60 HZ Power: 1000 W

The sets includes: CC 22 - Cable cutter with double jaws that cuts and strips copper and aluminium cable. KS 4T - Aluminum pruner with teflon-coated blades. Equipped with return spring. NCX IEUF or NCX IEUT - CrimpXChange Electric is a high-quality ratchet crimping tool that ensures proper crimping. It comes with three sets of dies for the most common types of terminal crimps. Dies in NCX IEUF: NCXD I0560 - for insulated cable lugs 0.5-6.0 mm² NCXD E0510 - for wire end ferrules 0.5-10 mm² NCXD UF0510 - for non-insulated cable lugs and copper tube lugs (KSF/KRF) 0.5-10 mm² Dies in NCX IEUT: NCXD I0560 - for insulated cable lugs 0.5-6.0 mm² NCXD E0510 - for wire end ferrules 0.5-10 mm² NCXD UT0510 - for non-insulated cable lugs and copper tube lugs (KST/KRT) 0.5-10 mm²

Cable cutters for copper and aluminum cables(not suitable for steel ropes or steel wires). Gives a clean cut without deformation. Cutting capacity for multi-stranded / solid cable: NRCC 36: 36 mm / 300 mm² NRCC 60: 60 mm / 500 mm².

Stripping tool with rounded steel stripping blades and intelligent self-adjustment for 0.5-16 mm². For fine-stranded & solid conductors with halogen-free, PVC or rubber insulation. Adjustable for diverse insulation materials and thickness. Automatic opening of jaws after stripping. Length positioner for adjustable stripping length from 2.0-17.0 mm. Cutting function for 6.0 mm² solid or 16 mm² fine-stranded conductor. Ergonomic design for fatigue-free work.

Tool kit equipped with tools for installing MC4 / MC3 connectors. The kit includes: NCX MC4 / NCX MC3 / NCX SOLAR – Crimping tool for solar panel connectors. This high-quality ratchet crimping tool ensures proper crimping. It comes with the NCXD MC4 / NCXD MC3 dies, and has storage in the handle for up to 2 extra pairs of NCXD type dies. NCX SOLAR is equipped with both NCXD MC4 and NCXD MC3 dies. CC 08 – Cable cutter with a single jaw for multi-stranded copper cable. Equipped with a return spring. MC4 RT – Assembly and unlocking tool for MC4 connectors (not included in NCX MC3-SET). PV Strip 2.5-6 – Stripping tool for solar panel cable from 2.5 mm² up to 6 mm². Integrated length stoppers at 8.5 and 15 mm, designed for common PV connectors.

Press tool suitable for work in tight spaces and for installers with small hands. Available in multiple versions equipped with 1 set of dies. The press tool is a ratchet pliers that ensures the completion of the pressing. The return lock has a release hook in case you want to terminate the pressing.

Edge clips can, for example, be used where there is no possibility of mounting holes or where there are difficulties for adhesive to adhere. These products are used for fixing cables, hoses & pipes. Commonly used in the automotive industry, cable manufacturers, cabinet builders, and other industries. The clips comes without cable ties. - For Edge thickness 1-3mm or 3-6mm. - Cable ties with inner or outer serrations can be used. - Cable ties can run along or across the edge (direction can be turned). - For 3.6 or 4.8mm cable ties. Material edge clips: PA66HIRHS UV

Splicing connector for 2 to 8 conductors for both solid and stranded cable. Transparent cover for easy inspection of connector. No tool needed. Voltage: 450 V Stripping range: 10 mm Solid cable 0.5-2.5 mm² Fåtrådig kabel 0.75-2.5 mm² Stranded cable with cord end sleeve: 0.5-1.5 mm2